Steel structure dairy farm shed building

Product description

Steel cow farm are assembled by steel columns and steel beams, they are section H beam, the purlin is C-shaped steel. Since the diurnal temperature difference is large, the insulation inside must be very good in the poultry. The siding and the roof panel are composite panels, the internal filling material is 50mm thick EPS insulation board, as well as has a certain fire- retardant features.

Product application

Steel structure poultry house is made of light weight steel structure, it's widely used for the chicken, sheep, cow, etc. The roof can be made of corrugated steel sheet or sandwich panel which has good insulation performance. The wall is built with steel mesh or sandwich panel. Both the wall and the roof have contributed to ensure an excellent insulation performance, therefore the shed is very resistant to wind, impact and climate change. We have professional designers who can design solutions for you according to your different needs.

Steel structure production process

1. Using automated equipment - CNC flame cutting machine, the steel plate will be cut into main steel components

Advantages: 1> Accurate cutting, error±2mm; 2> High production efficiency, can cut 150-200 tons of plates a day;

2. Use automated equipment - CNC drilling machine for small parts production

Advantages: fast speed, high precision, deviation≤1mm, to ensure 100% installation error-free

3. Use automatic equipment--straightening and welding integrated machine, H-beam assembly, submerged arc welding, and straightening three processes into one

Advantages: The error of the finished product is +—2mm, and the finished product is produced about 25 meters per hour, which greatly improves production efficiency.

4. Use the section steel intelligent marking robot to mark the welding position of the four sides of the section steel and mark the component number

Advantages: high accuracy, can be temporarily or permanently marked. It replaces the manual measurement of the later assembly team, which improves the production efficiency of the later production process by more than 80%

5. Use the steel cutting robot for thermal cutting of H-beam, I-beam, etc.

Advantages: The error range is within 2mm; the cutting port is smooth and beautiful, which is convenient for the later welding of the welding port; the tedious process of artificial incision and post-grinding is omitted; the cutting efficiency is fast, and the output can reach up to 50T/day.

6. Assemble the connecting plate; perform local spot welding by electric welding; check the dimensions to ensure that the dimensions of each component conform to the drawings.

7. Solder all the connections in the assembly process

Advantages: high productivity in cross-operation with assembly process, fast welding efficiency

8. Shot blasting and derusting process

Through the impact and cutting action of the spray material on the profiled steel, the surface rust of the profiled steel is removed to increase the roughness, and manual slag removal treatment is also performed.

Advantages: very good preparation for painting, enhanced adhesion of the coating to the profiled steel, extended durability of the coating film

9. Spray paint

Spray paint according to the drawings and customer requirements, and spray 4 times. After completion, the surface of the component will not sag, no bubbles, no cracks, and the color is uniform and beautiful.

10. Composite board/veneer production

Composite board production machine: 2000 square meters can be produced a day;

Veneer production machine: can produce 10,000 meters a day;

11. C section steel production

High production efficiency, can produce 5000 meters a day

12. Accessories production

Production of accessories such as bending parts;

Company strength

We have been specializing in steel structure design and production of 16 years, rich experience in export trade.
Factory area of 49,000sqm, 60 mid-level technicians, senior technicians 30, the annual output of 1 million tons, the production strength is very strong.
Our products are exported to South America, Southeast Asia, Africa, more than 30 countries and regions, exports experienced, the export volume of 800,000 tons, strong export capacity.

Product package

We are direct manufacturer for steel warehouse buildings manufacturer. Production period is about 25-45 days after receipt of advance payment. We will provide installation drawings, installation videos. If necessary, we will have dedicated staffs and engineers to the scene to guide the installation. loading and unloading of our products are convenient. You can use crane in the destination,two people can discharge whole products within half an hour. And definitely won't destroy packaging.

FAQ
Q1: You are manufacture factory or trading company?
A: We are direct manufacture for steel structure buildings. we have rich experiance of steel structure designing,manufacturing, processing and installation.

Q2: Is your price competitive with other companies?
A: Our business goal is to give you the best price with same quality and best quality with the same price. We will try our best to reduce your cost.

Q3: Do you offer service for installation?
A: We will give detailed installation drawings and video for free. And if you need, we could send engineers as installation director even a team.

Q4: Do you accept container loading inspection?
A: You are welcomed to send an inspector, not only for the container loading, but any time during the production time.

Q5: Do you offer designing service for us?
A: Yes, we have experienced design team,and we can design full solution drawings as your requirements.

Q6: What is the delivery time?
A: Delivery time depends on order quantities. Generally, the delivery time will be 30 days after receiving deposit.

Q7: How can you get a quotation for your projects?
A: You can chat with us anytime or you can just fill out our questionnaire and send back to us. We will give you the best quotation asap.